User's manual & helpful information

Hey! Here is the user’s manual for our LED props. 

Unpacking and delivery set. 

 After receiving the long-awaited parcel, when unpacking, please note that in addition to the main set of props, there may also be additional accessories. Most often they are packed in a small transparent bag and attached with tape to the main props. Unfortunately, there have been times when accessories were thrown away with the packaging. 

 In the package you will find a couple of props, a small bag with two remotes and two USB Type-C cables. 

The basics of working with props. 

 In this paragraph, we will tell you in detail about all the controls and the nuances of working with props. 

 1). Turning props on and off: The main power button is the power button on the body of the props itself. Additional power button is the power button on the remote. Please note that when you turn off from the remote control, the props remain in standby mode and consume the battery. All our the props are equipped with removable batteries. You can purchase additional batteries that, if necessary (for example, you are on event where there is no opportunity to use recharging) you can replace. 
 
2). Charging: Any USB port from a PC or adapter for a mobile phone is suitable for charging props. Charging cables are included. Directly to charge the props, you need to connect the cable to the USB port and to a special port on the props body. After connecting the cable, you see a red or blue light in the cable connection area. Red light means the charging process, blue color indicates that the props are charged. 
 
3). Working with remotes: The props are equipped with two remotes that can be controlled as each with his own fan/buugeng, so one remote control can control a pair. Each the remote is equipped with a replaceable CR2025 battery. The battery is not rechargeable, so we recommend purchasing a stock. 
 
4). The main control keys on the remote and their combinations: 

MODE + / MODE is a mode switch that includes both dynamic modes and static colors. MODE + switches the mode forward, MODE- returns to the previous one. 
MENU AUTO includes a demonstration of all modes. 
SPEED + / SPEED- in dynamic modes adjust the speed displaying the mode itself, in static mode they adjust the brightness. 
Let's take a closer look at brightness control. This is a very useful feature, which allows you to save power and increase the operating time of the props. For using it, press one of the static colors (WRGB) on the remote control and then use the SPEED + \ SPEED- buttons in order to increase or decrease brightness. The props will remember the brightness you selected and will apply it not only to static colors, but also to dynamic modes. 
DIY buttons let you work with your favorite modes. If you like a mode and do not want to search for it again, you can add it to your favorites by using the ADD DIY button. In turn, the DEL DIY button removes the mode from the chosen one. DIY + \ DIY- lets you switch between the modes you added to favorites. You can add to favorites both dynamic modes and static colors. 
W R G B are static colors (white, red, green and blue). 
 
4.a). Since the delivery set includes two remotes, you have the opportunity to do so, that a pair of props is controlled by either one remote control or each unit props were controlled by their own remote control. By default, any of the remotes in the kit controls both props at the same time. For example, you turned on two fans/buugengs and pressed with any remote control MODE +. Regardless of the selected modes, on two props the next mode will switch. Both props will respond to any manipulations with one (any) remote control. Since for the connection between the props and the remote control uses a radio signal, due to interference one of the fans/buugengs may miss this signal and not receive it, as a result of which desynchronization of modes between two props. In order to synchronize props, press the MENU AUTO button, or W \ R \ G \ B. In order to more accurately control each fan/buugeng we recommend that you attach each remote to its own props unit. Take one remote and one 
the props unit, turn on the props itself from the button on the base, hold down the G button on the remote until the props blink. From now on, this props will be work only with this remote control and will not respond to the second remote control. For, to detach a props from a certain remote control, it is necessary on any remote control hold down the W button until the props blink. After you untie a unit of props from a specific remote control, the props will respond to any remote controller. By binding each remote to its own props unit, you can control each by the props unit regardless of when they are included. On shutdown the linking of the remotes is saved.